Welcome to call for the accessories of the circulating filtering ultrasonic cleaning machine. Choosing the equipment with higher power will greatly reduce the time and cost of maintenance in the future. The insufficient power of dust removal equipment not only damages the health of workers, but also seriously affects the visibility of sandblasting room. Dust cannot be discharged out also affects the quality of sand itself and the surface roughness of workpiece. The manual sandblasting room should be designed according to the actual situation, which is more spacious than the space to accommodate the workpiece.

 

However, it has high cavitation strength and noise, so it can be used to clean the workpiece with high bonding strength between the surface of large parts and the surface of the object. At the frequency of about 40KHz, under the same sound pressure, the number of cavitation bubbles is large, but the cavitation intensity is low, the noise is small, and the penetration ability is strong. It is suitable for the workpiece with complex blind hole dirt and weak surface adhesion.

 

The built-in all electronic ultrasonic control system can be operated continuously for a long time. It is safe and easy to operate. It can be designed and manufactured according to customer requirements. What is the working principle of multi slot ultrasonic cleaning machine? The following is to introduce the main links and steps of its work, the principle and knowledge of how the multi groove ultrasonic cleaning machine works. The principle of ultrasonic cleaning machine is to use transducer.

This can also cause the transducer to fall off and the heater switch should be turned off to avoid damage to the heater due to no liquid in the tank. The cleaning tank must be filled with liquid before it can be started to work. The water level is more than 100 mm (bottom vibration type) and placed horizontally. When the transducer is on the side, it is at the position of 100 mm along the cleaning tank. If the machine is started in air, the machine will be damaged.

Type	Internal size L*W*H (mm)	Frequency (Khz)	Power(W)	Heating(W)
UCE-XH1006ST	280×210×210	20,28,33,40,80,130	300	100
UCE-XH1012ST	400×310×280	20,28,33,40,80,130	600	300
UCE-XH1018ST	490×360×320	20,28,33,40,80,130	900	500
UCE-XH1024ST	630×430×320	20,28,33,40,80,130	1200	1000
UCE-XH1030ST	630×530×320	20,28,33,40,80,130	1500	1000
UCE-XH1036ST	680×530×360	20,28,33,40,80,130	1800	1000
UCE-XH1040ST	680×570×400	20,28,33,40,80,130	2000	1000
UCE-XH1041ST	730×570×450	20,28,33,40,80,130	2400	2000
UCE-XH1042ST	790×670×510	20,28,33,40,80,130	3000	2000
UCE-XH1043ST	850×770×570	20,28,33,40,80,130	4000	2000
UCE-XH1044ST	910×820×620	20,28,33,40,80,130	5000	3000
UCE-XH1045ST	960×870×680	20,28,33,40,80,130	8000	4000
UCE-XH1046ST	1100×930×730	20,28,33,40,80,130	10000	5000