Common faults of ultrasonic vibrating screen transducer of vibrating screen:

1. If the ultrasonic vibrator of the ultrasonic system of the vibrating screen is damped, the plug connected to the transducer can be checked with a megohmmeter. The basic situation can be judged by checking the insulation resistance value. Generally, the insulation resistance is more than 5 megohm. If the insulation resistance value is not reached, the transducer is generally damped, The whole transducer (excluding the plastic spraying shell) can be put into the oven and set at about 100 ℃ for drying for 3 hours, or an electric hair dryer can be used to remove moisture until the resistance is normal;

2. If the transducer vibrator is ignited and the ceramic material is broken, it can be checked with naked eye and megohmmeter. Generally, as an emergency measure, it can disconnect individual damaged vibrator without affecting the normal use of other vibrators;

3. Vibrator degumming, our transducer is the use of cementation, screw fastening double guarantee process, in general, this situation will occur;

4. Stainless steel vibration surface perforation, general transducer full load use 10 years may appear vibration surface perforation

be careful:

When ordering, please explain your product characteristics, use purpose and handling capacity requirements, and determine the vibrating screen model according to the data you provide. We can also design and manufacture special types and specifications of ultrasonic vibrating screen according to the needs of users.