35khz Ultrasonic cutter for auto parts interior plastic
High stability: when the ultrasonic generator works, it generates 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the cutting knife and cutting materials. It can be cut mechanically, so it does not need a sharp edge, the blade wear is small, and the cutter head can be replaced by itself.
No pollution: when the ultrasonic knife cutting, the temperature of the knife head is lower than 50 ℃, it will not produce smoke and odor, which eliminates the danger of injury and fire when cutting.
Neat cutting: due to ultrasonic cutting through high-frequency vibration, the material will not adhere to the blade surface, only a small pressure is needed when cutting, and the fragile and soft materials will not be deformed and worn, and the fabric will be cut with automatic edge sealing at the same time, which will not cause edge collapse.
Simple operation: the cutting knife is connected to the ultrasonic generator, the generator is connected to the 220 V power supply, the switch can be turned on for cutting, the hand-held cutting is supported, and the air-cooled interface is equipped.
Wide range of applications: all kinds of textile materials and plastic sheets can be cut by ultrasonic wave, such as natural fiber, synthetic fiber, non-woven fabric and knitted fabric.
Type |
power
(W) |
Frequency |
Welding time |
Contains |
UCE-QG100W |
100W |
30khz,35khz,40khz |
0.1-3sec |
generator , transducer ,horn,head |
UCE-QG300W |
300W |
30khz,35khz,40khz |
0.1-3sec |
generator , transducer ,horn,head |
UCE-QG500W |
500W |
30khz,35khz,40khz |
0.1-3sec |
generator , transducer ,horn,head |
35khz Ultrasonic cutter for auto parts interior plastic